|
Support & Downloads
Downloads
|
|
|
 |
|
| Initial Configuration of device by USB memory |
|
The device can be configured by using USB memory
After you agree with terms and conditions, please click the file name and follow the instructions for downloading, installing, and using this software. Please keep in mind that you have agreed with terms and conditions when a download is performed. |
|
| 1.Operating procedures |
|
|
|
|
| 1. |
Decompress file
Download the file and decompress it. |
| 2. |
Insert USB memory into your PC |
| 3. |
Initial-configuration data is downloaded and the value of each setting can be reviewed.
|
|
| * |
Windows Notepad. can be used to view the configuration file. |
| * |
Other text editors can be used in addition to Notepad. |
| * |
The configuration format is: "configuration item name = configuration value" the name describes each configuration item, and each configuration item must be on its own line. |
| * |
The 1st line must be "silex", in order to distinguish this file from other files. |
| * |
When you perform a configuration by using USB memory, please be sure to set "TCP/IP Protocol =1" to enable the use of TCP/IP. |
|
|
| Configuration Settings Explanation |
| TCP/IP Setting |
| TCP/IP Protocol |
0:Disabled 1:Enabled |
| DHCP/BOOTP |
0:Disabled 1:Enabled |
| RARP |
0:Disabled 1:Enabled |
| IP Address |
Example: 192.168.1.1 |
| Subnet Mask |
Example: 255.255.255.0 |
| Default Gateway |
Example: 192.168.1.254 |
| NetBEUI/NetBIOS Setting |
| NetBEUI Protocol |
0:Disabled 1:Enabled |
| NetBIOS over TCP |
0:Disabled 1:Enabled |
| Computer Name |
Arbitrary character ( Max 15 letters )
Example) SX-5000U2 |
| WorkGroup |
Arbitrary character ( Max 15 letters )
Example) PrintServers |
| Browse Master |
0:Disabled 1:Enabled |
| Apple Talk Setting |
| AppleTalk Protocol |
0:Disabled 1:Enabled |
| PORT1 Printer Name |
Arbitrary character ( Max 31 letters )
Example) SX-5000U2-PORT1 |
| PORT2 Printer Name |
Arbitrary character ( Max 31 letters )
Example) SX-5000U2-PORT2 |
| PORT3 Printer Name |
Arbitrary character ( Max 31 letters )
Example) SX-5000U2-PORT3 |
| PORT4 Printer Name |
Arbitrary character ( Max 31 letters )
Example) SX-5000U2-PORT4 |
| PORT1 PostScript Mode |
0:ASCII 1:BCP 2:TBCP |
| PORT2 PostScript Mode |
0:ASCII 1:BCP 2:TBCP |
| PORT3 PostScript Mode |
0:ASCII 1:BCP 2:TBCP |
| PORT4 PostScript Mode |
0:ASCII 1:BCP 2:TBCP |
|
|
|
|
|
| 4. |
The file must be written into the root directory of the USB memory device.
The name must be "config.txt."
|
|
| * |
When you have two or more SX-5000WB(s), the file name format can be "cfgxxxxxx.txt". You can save time and effort by creating multiple configuration files using notepad and saving them in USB memory.
( xxxxxx is the last 6 digits of product serial number and Ethernet address ) |
| * |
Text editors other than notepad can be used. |
|
| 5. |
Perform PRICOM Configuration
|
|
| 1. |
Power off the product and attach the USB memory, containing the configuration information, to a USB port (USB1-USB4). |
| 2. |
Power on the PRICOM. |
| 3. |
Verify that the power LED (orange) lights up. |
| 4. |
If the configuration succeeds, all lights will go off and then the power LED will re-light. |
| 5. |
Please remove the USB memory and connect a printer by the USB cable. |
|
|
|
| 2.Cautions when using the product |
|
|
|
|
|
| 3.Conditions to use the product |
|
|
|
|
| * |
The responsibility of the consequence of downloading and installing this software is solely your own. |
|
|
| 4. Download |
|
|
| If you agree to the above written terms and conditions, click on the name of the file to begin the download process. |
|
|
|
| |
|
|
|
