|
Support & Downloads
Product Support Information
|
|
|
 |
|
PRICOM C-700/C-5100/C-6100U/C-6200U Printer driver compatibility
|
Please note that, depending on Canon BJ printer driver version, the following restrictions may apply.
Windows 95/98/Me Driver
Please note the following restrictions.
Applicable Printer Model:
S400, S450, S800, S4500, BJC-85, BJC-1000, BJC-1000SP, BJC-2000, BJC-2000SP, BJC-2100, BJC-2100SP, BJC-3000, BJC-4650, BJC-6000, BJC-6100, BJC-6200, BJC-6500, BJC-8200
| Restrictions |
Printer Driver Version |
| 6.5x |
6.6x |
6.7x |
6.8x |
6.81 |
| 1 |
The destination port name in the PRICOM-Print CX Set-up should be set as "LPT0"-"LPT9". If any other port name is assigned, the printer status monitor may not function properly. |
o |
o |
o |
- |
- |
| 2 |
When a previously assigned port name has been deleted, the computer should be restarted before assigning a new printer port name. |
o |
o |
o |
o |
o |
| 3 |
It may not be possible to activate the printer status monitor by going to [Start]-[Program]-[BJ Printer]-[BJ Printer Monitor].* |
o |
o |
o |
o |
o |
| 4 |
It may not be possible to activate the printer status monitor by right clicking on the installed printer and going to [Properties]-[Maintenance]-[Start Status Monitor]. |
o |
o |
o |
o |
o |
| 5 |
When the print job is executed from multiple client PCs to the printer model with only a USB interface, there will be the same status information of the first job in process shown at all the client PCs. (There will be no message shown as to mean "Other interface in use".) |
- |
- |
- |
- |
o |
Applicable Printer Model:
S500, S600, S630, S6300
| Restrictions |
Printer Driver Version |
| 7.00 |
7.10 |
7.11 |
7.20 |
| 1 |
The destination port name in the PRICOM-Print CX Set-up should be set as "LPT0"-"LPT9". If any other port name is assigned, the printer status monitor may not function properly. |
o |
o |
o |
- |
| 2 |
When a previously assigned port name has been deleted, the computer should be restarted before assigning a new printer port name. |
o |
o |
o |
o |
| 3 |
It may not be possible to activate the printer status monitor by going to [Start]-[Program]-[BJ Printer]-[BJ Printer Monitor].* |
o |
o |
o |
o |
| 4 |
It may not be possible to activate the printer status monitor by right clicking on the installed printer and going to [Properties]-[Maintenance]-[Start Status Monitor]. |
o |
o |
o |
o |
| 5 |
When the print job is executed from multiple client PCs to the printer model with only a USB interface, there will be the same status information of the first job in process shown at all the client PCs. (There will be no message shown as to mean "Other interface in use".) |
- |
- |
- |
o |
o : Restriction applies
*It is not possible to display the status information of printer in idle mode even when the BJ status monitor is activated.
Windows NT4.0 Driver
Please note the following restrictions.
| Restrictions |
Printer Driver Version |
| 2.5x |
4.1x |
4.2x |
4.3x |
4.4x |
4.5x |
| 1 |
It may not be possible to monitor the printer status via the BJ Printer Monitor. |
o |
o |
o |
o |
- |
- |
| 2 |
The destination printer port name in the PRICOM-Print CX Set-up should be left as default. If any other port name is used, the printer may not function properly. |
- |
- |
- |
o |
- |
- |
| 3 |
The destination printer port name in the PRICOM-Print CX Set-up should be xxx0: to xxx3 (xxx shall be any 3 characters of your choice. (e.g.:"ABC0:") |
o |
o |
o |
- |
- |
- |
| 4 |
It may not be possible to activate the printer status monitor by right clicking on the installed printer and going to [Properties]-[Maintenance]-[Start Status Monitor]. |
- |
- |
- |
- |
o |
o |
o : Restriction applies
Windows 2000/XP Driver
Please note the following restrictions.
| Restrictions |
Printer Driver Version |
| 1.1x |
1.2x |
1.3x |
1.4x |
1.5x |
| 1 |
It may not be possible to activate the printer status monitor by right clicking on the installed printer and going to [Properties]-[Maintenance]-[Start Status Monitor]. |
o |
o |
o |
o |
o |
| 2 |
When the print job is executed from multiple client PCs to the printer with PD series printers, there will be the same status information of the first job in process shown at all the client PCs. (There will be no message shown as to mean "Other interface in use".) |
o |
o |
o |
- |
- |
o : Restriction applies
|
|
