This is a unique 508dpi full 8bit grayscale fingerprint reader. The S1 fingerprint reader uses RF technology to penetrate the surface of the skin to obtain to the corium layer. This allows people who, in the past, could not use fingerprint authentication to easily use this reader. In addition the sensor in coated in Kapton. This makes the sensor extremely durable and resistant to accidents and vandalism. The fingerprint reader contains a series of rate sensors that allow for a unique and patented image reconstruction. By knowing the exact location at of the finger as it crosses the image line an accurate image can be reconstructed without the distortion normally associated with swipe sensors.

Superior performance Skin damage, dirt, dry finger, and other unfavorable conditions can make surface-level fingerprint patterns unreadable. Silex S1 reads below the surface level at the corium where the fingerprint pattern remains consistent.

Compatible with other silex fingerprint readers The S1 swipe sensor is fully compatible with all Silex fingerprint readers. Any Silex fingerprint reader can be used without having to re-register fingerprints.

High level of anti-spoofing The unique sensor technology used by the S1 simply will not read gummy fingers or other methods used to spoof fingerpint readers.

Compact and mobile The simple, sleek design of the S1 is suited for any PC desktop or laptop. By making the USB cable detachable, the standard cable can be replaced based on the reader’s proximity to the computer.

Model	S1
Sensor	RF type inner layer / swipe sensor
Sensing Area	12 mm x 18.5 mm
Resolution	508dpi
Software Support	Windows 2000, Windows XP
Interface	USB 2.0 Full Speed
Power Consumption	Max.100mA
Operating Condition	Temperature: 41 - 95°F (5 - 35°C), Humidity: Max. 85%RH
Storage Condition	Temperature: -4 - 122 °F (-20 - 50°C), Humidity: Max. 85%RH
Dimension	80 mm x 40 mm x 9.5 mm without rubber feet plus 1.5 m cable
Weight	60g w/o cable
Certification	VCCI Class B, FCC Class B, CE

*	Specifications are subject to change.
*	Notice that the computer must be "listed" in order to connect this product.