SX-ULPGN-EVK-AT

Evaluate Our Ultra-Low-Power Hostless Wi-Fi IoT Module

The SX-ULPGN-EVK-AT is an evaluation kit for our ultra-low-power hostless Wi-Fi IoT module, the SX-ULPGN based on Qualcomm's QCA4010 chipset using the Silex UART AT Command Set.

Silex IoT Connectivity Solutions Page

Top Features:

  • Add Cost-effective Embedded Wi-Fi Connectivity to Host MCU IoT Designs
  • Silex UART AT Command Set for Host MCU -- No Driver Required
  • Supports JTAG and Over-the-Air (OTA) Programming
  • Access to Hardware Interfaces: UART, SPI, I2C, I2S, PWM, ADC, and GPIO

Evaluate Now

Download SX-ULPGN-EVK-AT Product Spec

Download SX-ULPGN-EVK-AT Quick Start Guide

Download Silex AT Command Set (Version 2.12.x)

Download FTDI JTAG Application Note

Download SX-ULPGN Over The Air (OTA) Firmware Upgrade Application Note

SX-ULPGN-EVK-AT ships with the application program Siles UART AT Command Set to provide full evaluation of the capabilities of the SX-ULPGN including:

  • Access Point Mode & Station Mode
  • IEEE802.11 Power Save Mode
  • Suspend (Store Recall, Power Off)
  • Suspend (Sleep Wakeup, Host Deep Sleep)
  • TCP/IP & UDP Offload
  • HTTP Server Built-In for On-boarding
  • HTTP Client Supported
  • DHCP Client and DHCP Server
  • DNS Client and DNS Server
  • Socket API for Up to 4 UDP or TCP client/server Sockets

Software Features:

  • Modes: Station, AP
  • Authentication Methods: Open System WPA-PSK (WPA2-PSK)
  • Encryption Method: None, WEP, TKIP, and AES(CCMP)
  • WPS Method: Enrollee (PIN/PBC)
  • Protocols Supported: IPv4, IPv6, DNS, SNTP, HTTP, SSL/TLS, DHCP, and WPS
  • Application Development: Silex UART AT Command Set Specification
  • JTAG Debugging
  • Over-the-Air (OTA) Firmware Update Programming
  • UART Based Firmware Update: XMODEM Based

Silex IoT Connectivity Solutions Page

SX-ULPGN-EVK-AT ships with the following:

    • SX-ULPGN Evaluation Assembly
    • Silex Evaluation Firmware Image
    • USB-to-UART Cable Assembly for UART & Power (+5V)
    • Quick Start Guide Insert

    The SX-ULPGN is based on the QCA4010 Reference Hardware & Software. The Software and documentation is available on the Qualcomm Developer Network

    Silex IoT Connectivity Solutions Page

    Speak With An Expert

    Complete this form to request more product information. We process our requests within two business days.