SX-350OEM Internal Wired and Wireless Print Servers |
![]() |
- Overview
- Features
- Specifications
Contact Silex for availability
The SX-350 is an internal parallel print server designed specifically for OEM applications.
- Complete internal OEM network printing solution
- 802.11a/b/g wireless and 100Base-T/10Base-T Ethernet
- Works with all major operating systems and network operating systems
- Minimal hardware and firmware changes required in OEM printer
Easy-to-Use Wireless and Wired Networking for OEM PrintersThe SX-350 is an internal multiprotocol print server designed to allow OEM printer manufacturers and printer controller manufacturers to easily add wired and/or wireless network printing capabilities to their products. It is a small board-level product that mounts inside the printer and includes:
SX-350 Features and Benefits |
|
| 40-pin Centronics/IEEE 1284 parallel port interface to printer | OEM can use standard cabling to connect SX-350 with little or no hardware or firmware modifications required in the printer |
| 802.11a/b/g wireless radio model |
Allows OEM to network portable printers and to locate printers where cabling is difficult or impossible |
| Compatibility with all major operating systems, network operating systems, and printing methods | OEM can sell his printers into virtually any type of customer environment |
| JetAdmin and Web JetAdmin management software support | Allows OEM printers to be managed by the world’s most popular printer network management software |
| Sophisticated security features, including 802.1X authentication, plus all major wireless security protocols | Allows OEM to sell printers into virtually any type of customer network |
| UART (RS-232) serial port | Provides a method for configuring the print server without a network connection; can also be used as an interface to the printer’s front panel configuration subsystem |
| Dimensions | •4” x 3.5” x .782” (101.6 x 88.9 x 19.9 mm |
| Operating Temperature | 0° to 70° C |
| Storage Temperature | -40° to 85° C |
| Maximum Temperature Change Per Hour | 20° C |
| Relative Humidity, Operating | 10% to 90% non-condensing |
| Relative Humidity, Storage | 10% to 90% non-condensing |
| Altitude | 3.1km (operating; 9km (storage) |
| Printer Interface | IEEE 1284/Centronics bidirectional parallel (40-pin header) |
| Ethernet Interface | 10Base-T and 100Base-T (autosensing) |
| Wireless Interface (SX-350-1011 only) | 802.11a/b/g; 54, 48, 36, 24, 18, 11, 9, 6, 5.5, 2, and 1 Mbps; 2.4GHz ISM band |
| Power Requirements | +5.0VDC +/- 10% (via 40-pin header or 2-pin locking vertical header) |
| Regulatory | ROHS Directive 2002/95/EC compliant Agency regulatory compliance: Designed and screened for FCC, CE, VCCI Class A EMC compliance Designed and screened for FCC Part 15, CE, TELEC wireless standards compliance Actual regulatory compliance is responsibility of OEM |
| Operating System Support | Windows, Mac OS X and 9.x, UNIX, Linux, OpenVMS, OS/400, and most other types of host computers and operating systems |
| Supported Protocols | TCP/IP, NetWare, AppleTalk, NetBIOS/NetBEUI, and DLC/LLC |
| TCP/IP Application Programs | BOOTP, rarp, DHCP, tftp, arp/ping, SNMPv1/v2, IPP, lpr/lpd, TELNET, FTP, raw TCP, http, POP3 |
| Management and Utilities | Serial Port Emulator, ExtendView (GUI), Web Browser Interface, Command Line Console (accessible via serial port or TELNET), SNMP MIB I and II, Firmware Download via TCP/IP (master or slave mode TFTP, BOOTP with multiple server download), On-Line HELP |
| Wireless Security | WPA and WPA2 (personal and enterprise modes), PAP, MS-CHAPv2, 802.1x EAP with TLS/TTLS/ LEAP/PEAP/FAST, WEP |
| Wired and Other Security | 802.1x EAP with TTLS/PEAP/FAST, access control lists, protocol enable/disable, configuration password |
| Ordering Information | SX-350-0011 100Base-T/10Base-T print server SX-350-1011 OEM print server, 100Base-T/10Base-T Ethernet and 802.11a/b/g wireless |


