Embedded Gigabit USB Device Networking Module designed to easily add networking capability to any USB device.

• Easily embed Silex “SX-Virtual Link” (USB over IP) technology inside a USB device
• Allows all functions of USB device (ie: printer, scanner, fax, storage or any other function that normally works over a direct USB connection) to be connected and shared on the network

The SX-3000EDM is a compact self-contained embedded Network USB device module with Ethernet and USB interfaces on board. Designed for USB device OEMs who want to cost eectively add network connectivity to their existing USB product with nominal changes to the existing design, SX-3000EDM makes standard USB devices accessible from a Windows or Macintosh computers through gigabit network interface.

The target USB applications include scanners, printers/MFPs, digital TV tuners, disk drives and disk drive enclosures, security and ID readers and encoders, and many more.

The SX-3000GB is able to acquire status information, and allows for the configuration and use of the device

The included SX Virtual Link utility allows you to easily discover the USB devices on the network, connect and disconnect, and see status:

.

Also included is a web browser interface for configuration and management of the device.

Silex also offers the SX-Virtual Link SDK for Windows or Macintosh, which allows you to design your own custom utility for connection to the USB device over the network.

Dimensions

Features

• 250MHz ARM9 based SoC
• 256Mbit DDR memory
• 32Mbit Flash memory
• On board Gigabit PHY
• High Speed USB Host Controller 480Mbps
• Built in RJ45 connector with gigabit Ethernet support
• Single 3.3v power operation
• Complete Silex proprietary embedded OS
• A tact switch that can be programmed for reset, trigger, GPIO
• Works with Windows XP, Vista, and 7 (32/64-bit) and Mac OS X 10.4 and higher

SX-3000EDM Header Pin-Out

Pin	Signal Name	Direction	Level	Description
1	+3.3V	-	Power	+3.3V supply source (Max: 900mA)
2	USB_DP0	In/Out	In/Out	Host USB Connector 0 signal +
3	USB_DN0	In/Out	In/Out	Host USB Connector 0 signal -
4	GND	-	Power
5	NC	-	-
6	NC	-	-
7	GND	-	Power
8	USB_DN1	In/Out	USB	Host USB Connector 1 signal -
9	USB_DP1	In/Out	In/Out	Host USB Connector 1 signal +
10	GND	Ground	Ground
11	GPIOA30	In/Out	TTL	General Purpose I/O
12	GPIOA3	In/Out	TTL	General Purpose I/O
13	GPIOA29	In/Out	TTL	General Purpose I/O
14	GPIOA31	In/Out	TTL	General Purpose I/O