Application Notes

Silex Application Notes

Hardware Integration Design Guide for SX-SDMAC

Download this application note to learn how to integrate the SX-SDMAC product family to a customer’s schematic and PCB layout.

Thermal Profiles of Silex SDIO Radio Modules

Learn the thermal profiles of the Silex SDIO radio family including the SX-SDMAN, SX-SDMAN2 and SX-SDMAC to allow users to design optimal thermal mitigation approaches during the integration of the radios.

How to Use Power Saving Features of the SX-SDMAC?

Download this application note to learn about the different ways you can save battery power using our latest 802.11ac SDIO radio module, the SX-SDMAC.

SX-SDMAN to SX-SDMAC Migration Guide

Download this application note to learn the design requirements and considerations when migrating from the SXSDMAN-2830 to the SX-SDMAC-2830/2831 radio module.

Specification Differences between the SX-SDMAN and SX-SDMAC?

This application note explains the differences in specification between the SX-SDMAN-2830 and the SX-SDMAC-283X that customers should consider for their designs.

SX-ULPGN Over The Air (OTA) Firmware Upgrade Application Note

Download this application note to learn how to update the firmware in the SX-ULPGN using Over-the-Air (OTA) Method.

SX-ULPGN FTDI JTAG Application Note

Download this application note to learn how to enable the FTDI JTAG Debugger on the SX-ULPGN-EVK.

Software and Hardware Recommendations for SX-PCEAN2 Idle Mode Spurious Emissions

Download this application note to learn software and hardware recommendations for EMI issues you might face if you are using this product in your design.

How to Bring Up SX-PCEAN2 using ath9k Driver on an i.MX6 Sabre SD Platform

Download this application note to learn the steps required to bring up the the SX-PCEAN2 on the Sabre-SD EVK using the open source ath9k driver.

Enable Ethernet Medical Devices with Secure, Robust Wi-Fi Capability

This document explains how system administrators and users can use the Silex SX-BR-4600WAN Ethernet to Wi-Fi Bridge with virtually any Ethernet enabled device to allow connection to the organization's existing wireless network.

How to Implement Bluetooth on the NXP™ i.MX6 Sabre-SD EVK using the SX-SDMAN 

Download this application note to learn how to implement the necessary changes to the OS and EVK board as well as how to install the Bluetooth stack using our AR6233 based SX-SDCAN wireless module with the i.MX6 platform.

Deploy Polycom VVX Phones over Secure Wi-Fi

Download this technical paper to learn how to deploy Polycom VVX Phones over Secure Wi-Fi Networks.

Setting up Concurrent Network Interfaces using the SX-SDCAN radio in Linux

Download this application note to learn hwo to enable and demostrate "concurrent mode" on QCA6003 radio using our 802.11 radio evaluation kit, the SX-6K3-EVK-SD.

EN 300 328 & EN 301 893 Update: The Impact on Current Certifications and Products

Download this technical paper to learn how the new R&TTE rules impact the compliance of your products in Europe, and what steps are required maintain conformity and continue shipping into Europe.

802.1x Enterprise Security in Silex Technology Products 

This technical paper describes the security methods, encryption, and authentication protocols supported by Silex Technology wireless devices as a solution to security threats inherent in WLAN networks.

How to optimize the NXP BSP and configure the SX-SDCAN to evaluate with the NXP i.MX6 

Download this technical applicaton note to learn the steps required to bring up the the SX-SDCAN on the Sabre-SD EVK using the NXP™ BSP.

 

Speak With An Expert

Complete this form to request more product information. We process our requests within two business days.