Reset to Factory Default

This page explains how to reset the configuration of wiDock to factory default.
To conduct initialize wiDock used in other networks, please follow the procedure below and reset the configuration of wiDock to the factory default.

1. Unplug the AC plug of wiDock from the electrical outlet.

2. Hold down the link button at the front of wiDock, and plug the AC adapter to the electrical outlet. Keep holding the link button to start the factory default configuration.
   

3. The factory default configuration is completed when the orange LED is turned on. Release the link button.

Do not turn off the device server while resetting to factory default. To turn on wiDock after the factory default configuration, do not press the link button. (Use the link button after the initial operation on startup is completed. )

Back to Top