Support & Downloads for

SX-510

 

  • Software & Firmware
  • Documentation

Software

Software Application Description
ExtendView Windows Graphical List of network devices used for configuration of Silex Device Servers
Serial Port Emulator Windows COM port over TCP/IP emulation software with Silex Serial Device Servers.

Firmware

Download the UpdateIP utility software if you are updating the existing firmware in your product. The utility file is in .zip format.

  • Another method is to use the TFTP command from the Command Line prompt (ie: Start>Run> then type "cmd")
  • You can upgrade the device without resetting any of the previous setting changes. Just make sure that the workstation can ping the IP address of the the print server. From there, just access the workstation’s Command (or DOS) prompt and enter this command:
  • (if the firmware file was saved in the C:\temp directory)
    C:\Temp>tftp –i [IP address of device] put [firmware file] access
    Example: C:\Temp>tftp –i 172.16.3.45 put wpss399.bin access
Software Application Description
UpdateIP Use the Update IP utility to verify your product's firmware version and upgrade to the latest version. Version 2.2.3 for Windows 2000 & XP.

Firmware File

Version Date Contents
1.52 6/30/2011 Latest SX-510 Firmware

 

Click on the contents file below to download the latest documentation for your product.

Unless otherwise noted, the documentation is in PDF format and requires Adobe Acrobat Reader to view.

Contents Date Description
Setup Guide 2/9/2009 SX-510 Setup Guide
Manual 11/17/2011 SX-500 & SX-510 Manual